TACAB Pickling Paste Super
Effective paste developed for higer alloyes stainless steels, example lean duplex, duplex and SMO but can be used on acid resistance steel grades with shortend pickling times.

Used for cleaning and passivating of welding joints and the heat affected zone (HAZ) for welded stainless steel constructions. Pickling paste is applied with a paintbrush. After pickling and ample rinsing with water (high pressure) the corrosion resistance is restored in the welded area.

TACAB pickling paste super is sold in the following sizes of packages: 1 kilo.
Pickling brush is included.
 

Properties:

·     Has an extraordinary good adhesive capacity and can  be applied on vertical
     surfaces and ceilings without any risk of running or drying.

·     Is economical to use, as only a thin film of the pickling paste is required
     for a perfect result.

     Working temperature interval is between +5 to +40 ºC.

​

   

Pickling time at 20 ºC:                          

Acid resistance steel	30-60 minutes depending on welding method
Duplex	60-120 minutes depending on welding method
Lean Duplex	90-180 minutes depending on welding method
Super duplex	120-240 minutes depending on welding method